Andrew’s Computers & Networking

Cooler Ventilator

---

---

Can this computer run the newest games on high settings?

MBO AMD 790GX / SB750, DDR2, sound, G-LAN, VGA, S-ATA, RAID, PCI-E, HDMI, s. AM2 / AM3, mATX
CPU AMD Phenom II X2 550 BOX Black Edition, s. AM3, 3.1GHz, 7MB c
Cooler SCYTHE Shuriken BIG SBSK-1000, s. 478/775/1366/754/939/940/AM2/AM2+
RAM PC-6400, 2 GB DDR2 800 MHz
RAM PC-6400, 2 GB DDR2 800 MHz
VGA PCI-E SAPPHIRE ATI RADEON HD 4670, 512MB DDR3, HDMI, DVI, D-SUB, HDTV
HDD 320.0 GB SATA, 16MB c., 7200 turns/min, for desktop
DVD±RW 20x, black, SATA, Dual layer, bulk
Housing LC POWER black, without PS
Power Supply 550W, LC POWER GREEN POWER, Silent, ATX2 v 2.2
Keyboard LOGITECH Deluxe 250, black, oem, PS/2
Mouse LOGITECH S96, optical, black, oem, PS/2
Speakers LOGITECH 2.1 S-220, Black
Ventilator 80mm

I need it to run the newest games on high graphic details without lag or stuttering.

Not a chance with a $75 graphics card like a Radeon 4670.

For gaming PCs, the most important component is your graphics card (GPU), followed by the CPU. So you should invest at least $150 in your graphics card and get something like a Radeon 5770. I'd also recommend an Athlon II X4 630 if you're going to play CPU-intensive games, since the additional cores will help.

Practical Approach to Building Ventilation and Cooling

Tenderall Fan Co. elaborated a few techniques of effective building ventilation and cooling. In industrial plants where there is a high density of employees and many manual operations involved, an improvement in the environment can produce substantial benefits in terms of increased production, reduced errors, and a decline in complaints and absenteeism among employees. In other circumstances, the attentiveness of an audience or student group may be a factor that spells success or failure for the project.

To obtain a reasonable degree of personnel comfort in hot weather, there are three basic factors that should be provided for in the ventilation and coolong system of a commercial or industrial building.

REMOVAL OF EXCESSIVELY HOT AIR

The first step toward controlling the hot air porblem is to provide for the removal of excessively hot air from the building. This superheated air frequently mixes with the air in the cooler areas of the building to produce an overall temperature increase. As superheated air is frequently localized around heat-producing machinery, it should be exhausted from the building near its source.

SUPPLY COOLER AIR

As a rule, outside air temperatures are considerably cooler than those inside a building. As superheated air is exhausted, provision should be made to replace it with fresh, cooler, outside air. When high temperature air is replaced by outside air, a substantial improvement in the average ait temperature of the building results.  Even where outside air temperature may be in the 80s or 90s, invariably it is 15 degress to 20 degrees cooler than the air it replaces. This is a very important improvement to the individuals affected.

VENTILATION

A very effective way to overcome the discomfort of a hot, stuffy room is to create a breeze. The circulation of air over a person's body immediately causes a cooling effect on the skin. When air is passed over a moist surface, it will evaporate some of the moisture and thus lower the temperature of the surface. This is precisely what occurs when air circulates across the human body. By creating a gentle breeze throughout a room or area, a great deal of cooling comfort is provided for individuals who must work there. This pattern of air circulation is sometimes called "breeze conditioning".

Commonly available prcatical methods of plants cooling are:

* Exhaust fans or Power Roof Ventilators (PRVs).

  To do a satisfactory job of eliminating excessively hot air, it is usually essential to have powered wall and/or roof exhausters. These fans should also help to control air pressure within the building whether it be negative or positive pressure.

* Supply Fans or PRVs.

  A large number of buildings use exhaust PRVs to exhaust fumes, smoke, dust or other contaminants unavoidable in the operation of the business. As a result, these buildings are frequently under a severe negative pressure. The solution to the problem of this kind is usually found in the use of supply fans or "make-up" air ventilators.

* Air Circulators.

  If the exhaust and supply air requirements of a building have been carefully engineered and installed, and there continues to be a high instance of worker discomfort, the problem usually relates to the matter of air circulation. In this way, in addition to amximum benefit from the fresh, cooler air, occupants receive the added comfort of air circulation over their bodies and they are not adversely affected by the superheated air being exhausted from the building.

Additional information can be found at the Tenderall Fan Co. web site http://www.tenderall.com/ahu/index.html.

Oleg Chetchel
Designer of Ventilation Equipment
Tenderall Fan Co.
http://www.tenderall.com/inquiry/index.html
http://www.tenderall.com/index.html

About the Author

Oleg Chetchel
Ventilation Equipment Designer
Tenderall Fan Co.
http://tenderall.com

Propeller clock by andreiu21